For The Oil & Gas Industry

Providing Quality Oilfield Consultants

Martin Longoria said:   January 15th, 2014 1:38 am

Hello; I was just released from Chevron do to budget cuts I was a wellsite manager on a P&A rig .I have 27 yrs of all round oifield I have my currant IADC WellCap.& ext. workover& completions back ground.

David Samuel said:   June 26th, 2013 2:45 am

I am joint owner and Managing Director of MindSafety Limited, who specialize in helping organisations develop a strong, belief-based positive safety culture, promoting safe behaviours within the workplace. More information about us can be seen at www.mindsafety.net We now have offices based in Dubai, and intend holding some complimentary events in the UAE. We can be emailed on mindsafety@post.com

Don Flaherty said:   February 6th, 2015 11:46 pm

A drilling co. recently installed our propane vapor injection system on two CAT 3508 engines operating their rig. Initial results show 11.7 gph savings per engine. At $2.99 per gallon the ROI for system and installation is 3 days! Please visit www.dualfuelsys.com or www.lpenergysystems.com

Tracie Daugherty said:   May 2nd, 2013 1:26 am

Housing for Oil Field Small Independent company, quotes and no large overhead. www.expresshomestx.com

Nicholas Akagha said:   December 20th, 2013 2:31 am

Hello, Could you please assist me in securing an OFFSHORE MEDIC job in Nigeria. Am a Nigerian Registered Nurse with over four years experience in oil and gas industry. I have Imca offshore Medic certificate,Dive Medic Technician, Emergency Medical Technician, Opito Bosiet,Huet,Mist Etc from united Kingdom. Most of the Offshore Medic advertised job so far are all in UK, Australia, Canada, America etc and am constrained to work in those countries due to Visas.

1 (361) 527-9154

Guest Book

Roy Byrd said:   June 13th, 2013 12:25 am

Experienced heavy haul & drill rig mover with SafeLand and OSHA Safety Supervisor certification considering a change on my career path.

Joe Montes III said:   September 5th, 2013 6:09 pm

I am a Safety drilling and Completions Consultant working in the eagleford Shale. Looking for consulting work to help achieve zero incidents and accidents.

ELIAS SANCHEZ said:   November 14th, 2013 1:08 am

I HAVE 28 YEAR YEARS EXPERIENCE IN COIL TUBING WORK OVER RIGS I AM THE MANAGER AT TOTAL THRUT TUBING CORPUS CHRISTI TX OFFICE HAVE CONSULTING EXPERIECE EAGLE FORD SHALE 10 YEARS EXPERIENCE ON FISHING TOOLS & DOWN HOLE MOTER

Harold Sanders said:   January 8th, 2014 10:25 pm

Pete, Thank you for all the work you & Dean have given us. It greatly appreciated. Keep up the good work

AAA Oilfield Consulting, Inc.

UWE KNORR said:   March 13th, 2014 1:07 am

hi due to search for a serious partner to our client, i had to do a random search on the internet and discovered your website. i am looking for a technical partner to our client. please if interest email me via admin@welwillend.com.

krishnaraj chauhan said:   May 25th, 2015 2:20 pm

Dear Sir/ Madam, We are a chemical supplier from India. We export Ammonium Bisulphite ( Oxygen Scavenger) 65% Min. used in oilfield services,caramel industries, Photography, and lab chemicals. Please let us have a chance to work with your organization. looking forward to receive your kind response. thnx

Myron Dee said:   February 28th, 2014 8:00 am

Hello. I am seeking an Oilfield Consultant position. I have 30 years experience in the Oilfield. I have worked my way up from Floorhand Operator,Toolpusher and then up to a Consultant on 24 hour Completions. I have experience with Directional Drillings and Workovers. I would like to submit my Resume with your Company. Thank You. 

Howard Button said:   June 8th, 2014 5:39 pm

I have been trying to get on an oil rig for a few years now i have never work in oil but have work in construction for 12 years im a hard worker couldu please send me an app

Brent Underwood said:   November 22nd, 2013 9:44 am

I am a veteran looking to get a start in the oilfield I am a NREMT basic and basic firefighter looking for a medic position or an entry level position
​225 571 2748

​Anil kale said:   June 18th, 2015 11:59 am

We are located in India & are involved in manufacturing oilfield equipments like Wireline Pressure control,Coil Tubing equipments,Gate Valves,Well Heads,High pressure piping,Mud valves,couplings for tubing & casings,mechanical packers,hyrraulic packers etc.You can visit our site www.parveen.in to view our product line. Your respons is most appreciated. Kind Regards Anil Kale

AYIM PAUL said:   November 29th, 2013 6:48 pm

CRUDE OIL RE-ASSIGNMENT ORDER SIR, HOW ARE YOU TODAY? I AM PRIVILEGED TO INFORM YOU THAT WE ARE DIRECT MANDATE SELLER AGENT TO NIGERIAN NATIONAL PETROLEUM CORPORATION(NNPC). PRESENTLY WE HAVE ONE MILLION BARREL OF BONNY LIGHT CRUDE OIL AVAILABLE FOR RE-ASSIGNMENT TO ANY SERIOUS BUYER. SIR, IF YOU HAVE ANY BUYER OR YOU ARE INTERESTED KINDLY GET BACK TO ME SHORTLY FOR MORE DETAILS. YOUR COMMISSION WILL BE PROTECTED. BEST REGARDS MR. AYIM PAUL. NNPC MANDATE SELLERS (2348126058668)

Ragesh said:   June 26th, 2013 2:45 pm

consulting serivces & inspection services for drilling companies, we are in saudi arabia, and willing to work any where. 

RAY NATIVIDAD said:   July 8th, 2014 1:19 am

HELLO I'M CURRENTLY EMPLY WITH BAKER HUGHES RIGHT NOW I AM SEEKING EMPLOYMENT AS CONSULTON I HAVE 25 YEAR IN OIL FEILD INDUSTRY IN COMPLETION WORKOVER P&A AND WAS MGN AT KEY ENERGY WELL SER. FOR TEN YEARS I'VE BEEN WITH BAKER NOW FOR 5YEARS AND I WOULD LIKE TO SEND A RESUME MY CONTACT NUMBER 361-946-8078 THANK YOU AND HAVE A BLESS DAY

Puff Gao said:   August 20th, 2014 12:19 pm

Dear Sirs/Madam, Hi,How are you doing? Nice to know you. This is Puff from XWC,Hefei China, which is a Professional Defoamer Manufacturer for decades. Our star products are silicone defoamer,non silicone defoamer,polyether defoamer and defoamer powder. They are mainly used for construction/paper making/water treatment/textile/oil exploitation etc. BTW, free sample is available if you need. Should you have any requests/interests, just let me know. Looking forward to your reply!

Mark Thurber said:   June 30th, 2013 7:21 pm

We provide Guar Gum Powder directly from the ground in India for our customers at the lowest possible price with a guarantee for the highest quality product. Additionally , we can support your fracturing activities with many of the industry standard slurry components and/or simply provide any slurry mix that you desire. Give us an opportunity to prove our world class service.

ricardo said:   July 30th, 2015 10:39 pm

Good day, we are at your service to offer barite used in drilling process; We are producers, distributors and marketers; have the ability to surtirle your needs with the weekly production of mercury requiring all necessary documentation, as well as a range of products that we produce in our mines that we offer, any doubt or care at tel. (52) 492 121 9020, 492 922 1451 Zacatecas Mexico.

George Kulbeth said:   May 7th, 2013 9:43 pm

Consulting for Chesapeake Energy since March, 2012 in Northern Oklahoma in Mississippi Lime Play. Work slowing down. Looking for steady work.

Kevin Reidy said:   January 19th, 2015 11:16 pm

Pete, I enjoyed talking with you today. Please keep Me in mind and Ill start researching well view so next time Ill have a better answer for You. I look forward to meeting with You If You need anything let Me know. Thx Kevin R

JOE HUDSON said:   December 27th, 2013 8:04 pm

I have 35+ yrs. in the oilfield w/ 8 yrs. as a drilling consultant, 13 yrs. as tool pusher/ rig manager. I am currently looking for employment, I have worked in the eagle pass area as a tool pusher in the 90s. I have drilled horizontal wells in north western Oklahoma and directional wells in the Pecos area. I would like to work for AAA Oilfield Consulting inc.

Travis larson said:   June 6th, 2013 8:26 am

I'm owner of a general construction firm specializing in underground and above ground structures. 44 year old company looking to re-locate to texas. Looking to work as a project manager/client consultant. I have excellent management and customer relationship skills. Solid dedication to safety and quality products and performance. Can meet to talk anytime. I'm a godly family man that does not drink,smoke or use drugs. Thanks!

Jonathon Williamson said:   August 13th, 2013 10:28 pm

I have been a completion consultant for a little over two years. I was wondering if AAA was looking for any completion consultants. Primary focus on frac and pump down, drill outs and remedial work.

Glenn Parry said:   February 15th, 2014 2:25 am

I am a drilling Supervisor with 40 years experience. I would like to provide you with a resume to be considered for employment with you.

Jerry Jones said:   June 11th, 2013 12:10 pm

Consulting for Oxy for 7 yrs. Wanting to move to south Texas. 

Randy Welch said:   September 30th, 2013 9:08 pm

I am a 25+ year mud engineer with land experience from So. Texas to Montana and 13 years offshore in the Gulf of Mexico. I also have 10 year experience in the safety industry. I am looking for a drilling supervisor position. Home: 405-721-1978; Cell: 405-343-4659

Norberto Alonzo said:   November 4th, 2014 1:28 am

Hello, This is Norberto Alonzo, I am currently looking for a consultant position. I have ten years experience, and have consulted for a year and a half. I am currently a Drilling and Completions Wellsite Supervisor. I feel that I will be a good fit for your company. I have experience with directional as well as, vertical wells. It would be my pleasure to send you a copy of my resume. I am also currently certified in well control.

mike morrison said:   December 4th, 2013 12:37 am

dear sir i am interested in oilfield work primarily as a mechanic but am open to other positions if you can please send me any contact info for seeking employment with your company thankyou